不同的屋顶安装光伏组件的方法也不一样，那么厂房屋顶光伏发电采用哪种安装形式？常见的安装方式有三种，下面小编为您讲解。

The method of installing photovoltaic modules on different roofs is also different, so which installation form is used for photovoltaic power generation on the roof of the plant? There are three common installation methods, which are explained below.

1、坡屋顶安装方式

1. Slope roof installation method

光伏板通过光伏支架顺着屋面架空的安装方式，同时所有的安装规则要遵守通风散热的要求。光伏电站阵列与屋顶属于平行铺设，光伏支架使用点阵式固定住主横梁。

Photovoltaic panels are installed overhead along the roof through photovoltaic brackets, and all installation rules shall comply with the requirements of ventilation and heat dissipation. The array of photovoltaic power station is laid in parallel with the roof, and the photovoltaic support uses dot array to fix the main beam.

2、平屋顶安装方式

2. Flat roof installation method

平屋顶的结构比坡屋顶还简单些，在设计的时候找好光伏电站的适合的安装倾角；其次，水泥屋顶的防水层要做好，要使用防水卷材、水泥砂浆保护层、瓷砖等做好防水工作。

The structure of flat roof is simpler than that of pitched roof. When designing, find out the appropriate installation angle of photovoltaic power station; Secondly, the waterproof layer of the cement roof shall be well prepared, and waterproof coiled materials, cement mortar protective layer, ceramic tiles, etc. shall be used for waterproofing.

3、彩钢屋顶安装方式

3. Installation method of color steel roof

彩钢瓦屋顶属于工厂厂房屋顶使用比较多的屋顶结构了，其实彩钢瓦屋顶安装光伏电站与坡屋顶安装方式区别不大，区别就是光伏电站底座安装方式不一样。如果在屋顶的结构承载力满足的情况下，可以把倾角翘起来，加大安装角度。

The color steel tile roof belongs to the roof structure that is used more frequently on the factory building roof. In fact, the color steel tile roof is not very different from the slope roof in terms of the installation mode of photovoltaic power station, but the installation mode of photovoltaic power station base is different. If the structural bearing capacity of the roof is satisfied, the tilt angle can be raised to increase the installation angle.

如果屋顶属于彩钢瓦型式，一般都考虑附加型，直接将组件平铺在彩钢瓦上，尤其是一般彩钢瓦屋顶都没有墙，采用平铺的型式防风效果非常好，非常为安全；另外彩钢瓦屋顶也有一定的倾角，虽然可能不是光伏发电对应的非常佳倾角，但加大倾角带来的改造成本也是需要综合考量的。

If the roof belongs to the color steel tile type, the additional type is generally considered, and the components are directly laid on the color steel tile. In particular, the color steel tile roof has no walls, so the flat type is very effective and safe; In addition, the color steel tile roof also has a certain inclination angle. Although it may not be a very good inclination angle for photovoltaic power generation, the transformation cost caused by increasing the inclination angle also needs to be considered comprehensively.

厂房屋顶光伏发电采用哪种安装形式？我们从三个方面来讲解了内容，您对此有什么疑惑就来我们网站http://www.zdnygf.com进行咨询吧！

What type of installation is used for photovoltaic power generation on the roof of the plant? We explained the content from three aspects. If you have any doubts about it, please come to our website http://www.zdnygf.com Consult!